Spinny S500 Touch Screen is semi-automatic wrapping machine with rotating table. Equipped with automatic cut & weld system, motorised pre-stretch for the best saving of stretch film (up to 400%) available in 1 or 2 motors version.SPECIFICATIONS:Automatic cut&weld system Rotating table diameter 1650 mm load 2000 kg for pallet 1000×1200 mm Distance between column and rotating table 500 mm Wrapping height up to 2100 mm detected by photocell Separate programming of top and bottom reinforcement wraps Table rotation regulated by variable frequency drive from 5 to 15 rpm Sensor controlled rotation stop Variable speed of film carrier completely customizable Independent top and bottom turns Film carrier fall protection system Touch screen control panel with 10 password protected working cycles Manual film carrier stop for reinforcement wrapping turns. Rope reduction of the film Tension 230V-50HzOPTIONALS:Rotating table with diameter up to 1800 mm for pallet 1200×1200 mm Pallet height up to 3800 mm Remote controlA pre-stretch system for stretch film wrapping of pallets allows for efficient use of the stretch film, even for light or unsteady pallets. The stretch film is supplied in the correct amount by rollers operated by a motor, with an electronic system to keep tension constant on the entire pallet's surface. The motorized pre-stretch system can increase film efficiency up to 300%.The Dual Motor version of the system is designed for even greater film savings and economic benefits, with a variable stretch factor of up to 400%, while operating on the same principle as the single motor version.